Cartier Cuts 6.6 g/t Au over 13.0 m Along Depth Extension of Zone 6N1 Doubling Resource Potential Near Mine Infrastructure

Highlights:

• 23.3 g/t Au over 2.0 m included within 6.6 g/t Au over 13.0 m and 7.8 g/t Au over 3.0 m, were intersected 450 m below previously announced Zone 6N1 drill results.
   
• The results extend the potential for additional resources for the Zone 6N1 to a depth of 1,100 m.
   
• The intersections are from two drill holes, 50 m apart, and demonstrate the continuity of gold mineralisation in the deepest expression of Zone 6N1 known to date.
   
• Zone 6N1, proximal to underground infrastructure, could be rapidly accessible at low cost via additional mine development.
   
• The new resource potential of Zone 6N1 is in addition to the resource potential leftover from mine closure as well as to the resource potential developed up to 1,6 km depth below the Chimo Mine workings along Zones 5.

VAL-D’OR, Quebec, Nov. 27, 2018 (GLOBE NEWSWIRE) — Cartier Resources Inc. (TSX-V: ECR) (“Cartier”) reports additional drill hole intersections grading 23.3 g/t Au over 2.0 m included within 6.6 g/t Au over 13.0 m and 7.8 g/t Au over 3.0 m on the Chimo Mine project is situated 45 Km east of Val-d’Or.  The results, intersected at a depth of 1,100 m, extend the Zone 6N1 resource potential an additional 450 m (FIGURE). Zone 6N1, which is 80 m from the underground infrastructure (FIGURE), could be quickly accessible and at low cost with additional mining development work.

The intersections are from two boreholes that are 50 m apart, demonstrating the continuity of the values and the lengths of gold intersections at depth of Zone 6N1. The Zone, which begins at the surface, is continuous at least to a depth of 1,100 m with a high probability of continuing as deep (1.6 km) as seen with Zone 5 below Chimo Mine.

“These results show the quality of gold content and dimensions of the new potential of Zone 6N1.” commented Philippe Cloutier, President and CEO, adding, “this resource potential is in addition to the resource potential remaining within the underground infrastructure as well as that developed along Zones 5 to a depth of 1.6 km below the Chimo Mine sites.”

The details of the new results received from the laboratory are as follows:

Lengths are expressed along drill core axis.  The true thickness was not determined.

The Phase II drilling program currently underway (August 28th 2018 press release) and is focused on the resource development potential of 7 peripheral gold zones to the main cluster of Zones 5. This program consists of 40 drill holes totaling 15,000 m.

The reader should view the YouTube VIDEO, available on Cartier’s website.  The 3D video helps visualize the different gold-bearing structures on the Chimo Mine property as well as key components that are the mine infrastructures, the gold-bearing zones, the gold intersection areas left unmined as well as the main targets of the ongoing drill program. The gold structure and zone 6N1 is illustrated.

Chimo Mine Project Highlights

• The Chimo Mine produced 379,012 ounces of gold (MERN DV 85-05 to DV-97-01).

• Cartier owns 100% interests of the property.

• Year-round access by road, proximal to custom mills.

• Gold ore was mined intermittently from 14 zones by 3 different producers from 1964 to 1997 with a weighted average grade of 4.8 g/t Au.

• Mine infrastructure consists of a network of drifts distributed on 19 levels, 80 m to 870 m deep, connected by a 3-compartment shaft 965 m deep. The headframe and surface facilities were dismantled in 2008 but the electrical line and the sand pit are still present.

• A 105-hole drill program totaling 45,000 m has been underway since July 2017.

• Press releases on drill results from the Chimo Mine project since beginning of program:

• November 12, 2018 – Cartier Continues to Widen Zones 5 below Chimo Mine…
• October 25, 2018 –  Cartier Widens Zones 5 Below Chimo Mine With…
• October 9, 2018 –   New Zone 6N1 Increases Potential at Chimo Mine
• September 19, 2018 – Cartier Confirms Mineralization Continuity to a Depth of 1.6 km…
• August 28, 2018 –   Cartier Ramps Up Expanded Chimo Mine Drill Program
• June 28, 2018 – Cartier Cuts 86.1 g/t Au over 1.5 m at Chimo Mine
• May 29, 2018 – Cartier Cuts 4.8 g/t Gold over 4.0 m, 525 m Below Chimo Mine
• May 16, 2018 – Cartier Cuts 6.0 g/t Gold over 3.0 m and Expands Zone 6P2 …
• March 27, 2018 – Cartier Cuts 8.5 g/t Gold over 3.5 m, 205 m Below Chimo Mine
• March 20, 2018 – Cartier Cuts 7.6 g/t Gold over 5 m, 235 m Below Chimo Mine
• March 6, 2018 – Cartier Cuts 6.5 g/t Au over 4.0 m, 165m below Zone 3 at Chimo Mine
• February 14, 2018 – Cartier Cuts 4.7 g/t Au over 5.1 m Including 17.7 g/t Au over 0.5 m…
• January 18, 2018 – Cartier Cuts 7.5 g/t Au Over 2.0 m and Extends 2B Zone …
• November 17, 2017 – Cartier Intersects 9.4 g/t Au Over 6.5 Meters at Chimo Mine
• November 7, 2017 – Cartier Intersects 7.6 g/t Au Over 3.3 Meters on Chimo …
• October 24, 2017 – Cartier Intersects 7.3 g/t Au Over 2.2 Meters on Chimo, Extends 5M4..
• January 18, 2017 – Cartier Intersects 8.2 g/t Au over 7.0 m on the Chimo Mine Property

About Cartier

Cartier Resources was founded in 2006 and is based out of Val-d’Or, Quebec.  Quebec has consistently ranked high as one of the best mining jurisdictions in the world primarily based on its mineral rich geology, attractive tax environment, and pro-mining government.  In 2017, the Fraser Institute again ranked Quebec as one of the best jurisdictions in the world for investment attractiveness.

Cartier Investment Highlights

• The Corporation has a strong cash position with over $8M in the bank and important corporate and institutional investors including Agnico Eagle Mines, JP Morgan UK and the Quebec investment funds.
• Cartier’s strategy is to focus on gold projects that are relatively advanced with significant potential for resource expansion laterally and at depth.
• The Corporation holds a portfolio of advanced stage exploration projects in the Abitibi Greenstone Belt in Quebec – one of the most prolific mining regions in the world – the commodity focus is gold.
• The Corporation is focused on advancing its four key projects through drill programs.  All of these projects were acquired at very reasonable valuations over the past few years.  All of them are drill-ready with targets identified similar to the deposits that have been outlined on each project.
• The Chimo Mine project is a historic gold producer. Three other projects, namely Wilson, Benoist and Fenton, hold historic resource estimates.
• In 2018, an ongoing program of 105 holes totaling 45,000 m aims to enhance the resource development potential at Chimo Mine.

Quality Assurance / Quality Control

All lengths, mentioned in this press release, were measured along the drill core. The NQ core samples are crushed up to 80% passing 8 mesh sieves and then pulverized up to 90% passing a 200-mesh sieve. Cartier inserts 5% of the number of samples in the form of certified standards and another 5% in the form of sterile samples to ensure quality control. The samples are analyzed at the Techni-Lab laboratory (Actlabs), located in Ste-Germaine-Boulé, Quebec. The 50 g pulps are analyzed by fire assay and atomic absorption. For samples containing visible gold, 1,000 g of rock are directly analyzed by the “Metallic Sieve” method.

The scientific and/or technical information presented in this press release has been reviewed and approved by Mr. Gaétan Lavallière, P. Geo., Ph. D. and Vice President for Cartier Resources.  Mr. Lavallière is a qualified person as defined by National Instrument 43-101.

Neither the TSX Venture Exchange nor its regulatory services provider accepts responsibility for the adequacy or accuracy of this press release.

A figure accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/a4ff6107-24bb-4d7b-a6fc-d3af8b5f9d35