TORONTO, Dec. 10, 2019 (GLOBE NEWSWIRE) — Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or the “Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today reported new drill results from underground exploration drilling at the Macassa Mine in Kirkland Lake, Ontario. The new results include 45 drill holes (15,238 m) of drilling from the east and west exploration drifts on the 5300-foot level (“5300 Level”) as well as from the 5600-foot level Ramp Development (“5600 Ramp”). Results being reported today are from three underground drill rigs focused on targeting the Amalgamated Break as well as the SMC West and East. Drilling will continue through the remainder of 2019.A total of 27 drill holes for 6,664 m were drilled south from the 5300 Level west exploration drift and an additional 3 drill holes for 1,128 m of drilling were completed from the 5600 Ramp targeting mineralization associated with the Amalgamated Break (Figure 2). The new drill results confirm and build upon the results reported from this area as highlighted in the Company’s May 2, 2019 and September 16, 2019 news releases and has resulted in new intersections 35 m west of the previously released intercepts, as well as numerous high-grade infill intercepts. An additional 15 drill holes for 7,446 m were drilled from the 5300 Level east exploration drift targeting the SMC East (Figure 3) to follow up on previously released positive results. The new drilling further extended the high-grade mineralization by 75 m to the east of the SMC and confirmed the continuity of known mineralization outside of existing Mineral Resources.Tony Makuch, President and CEO of Kirkland Lake Gold, commented: “Today’s results highlight the substantial exploration potential along the Amalgamated Break and further increase our confidence that we can significantly grow the SMC. The new intersections along the Amalgamated Break both confirm and expand the known areas of high-grade mineralization in this very high-potential area. We have already identified two key areas of high-grade mineralization associated with the Amalgamated Break and will continue to drill to extend these areas and explore for new high-grade zones. At the SMC, we previously announced that we had intersected high-grade mineralization close to 300 m to the west and 200 m to the east of current Mineral Resources and have since extended the known mineralization to the east another 75 m. We have also established the continuity of mineralization to the east with a number of new high-grade intersections from infill drilling. Going forward, we will continue to drill along the Amalgamated Break, which has both significant near and longer-term exploration potential, and will also work to further extend high-grade mineralization around the SMC as part of our work to replace and grow Mineral Reserves and Mineral Resources at Macassa.”Amalgamated Break and SMC WestA total of 30 holes for 7,792 m of drilling is being reported from drilling off of the 5300 Level west exploration drift and the 5600 Ramp targeting the Amalgamated Break near the merge point of the SMC (Figures 1 and 2). The current phase of the exploration drilling program was designed to extend the known limits of the mineralization associated with the Amalgamated Break as well as infill previously tested areas with tighter spaced drilling to aid in the interpretation of the geometry of the mineralization. The program has been successful in intersecting additional high-grade mineralization in both regards. Drill holes of note in this area include: 32.5 g/t over 3.5 m core length in Hole 53-3916, 40.3 g/t over 2.7 m core length in Hole 53-3917 and 12.1 g/t over 12.8 m core length in Hole 53-3918A. Further drilling and interpretation work are necessary to confirm geometries of individual intercepts. Refer to Table 1 for a completed list of drill hole results. The Amalgamated Break has been largely untested and represents an important emerging exploration target which remains open and represents a highly prospective target area for the addition of new Mineral Resource ounces. Drilling to follow up on the down dip and eastern and western extent of this mineralization will continue into 2020.SMC EastA total of 15 holes for 7,446 m of drilling is being reported from drilling off of the 5300 Level east exploration drift targeting the SMC East (Figure 3). The current phase of the exploration drilling program was designed to extend the known limits of the SMC East as well as infill previously tested areas with tighter spaced drilling to support potential resource growth. The program has proven successful in extending the known high-grade mineralization envelope an additional 75 m east of previously released intercepts (see news release dated September 16, 2019) as well as confirming continuity of the known mineralization with the addition of several high-grade infill intercepts. Drill holes of note in this area include: 50.8 g/t over 2.4 m core length in Hole 53-3927, 47.7 g/t over 2.0 m core length in Hole 53-3926 and 30.1 g/t over 2.0 m core length in Hole 53-3888. The shallow dipping SMC East horizon continues to deliver positive results and remains one of the key target areas to support resource growth and future mining opportunities for #4 Shaft. Drilling on the SMC East from the 5300 Level east exploration drift will continue for the remainder of the year.To view the figures accompanying the press release, please click on the following links:Figure 1. Plan View – Amalgamated Break
https://www.globenewswire.com/NewsRoom/AttachmentNg/d52575fa-5933-40ed-b0ff-fa67b942b293
Figure 2. Cross Section – Amalgamated Break Looking Southwest
https://www.globenewswire.com/NewsRoom/AttachmentNg/b9b8e7cf-3a95-4638-856d-e6c25e01bc5bFigure 3. Plan View – SMC East
https://www.globenewswire.com/NewsRoom/AttachmentNg/c7646520-e86f-4725-8fd3-eeb00658065a2019 Underground Exploration DevelopmentUnderground development on the 5300 Level has been ongoing throughout 2019 including advances both to east and to the west and the excavation of diamond drill platforms. This development is part of an ongoing effort to expand the SMC and Amalgamated Break in all directions and to test for, and define, new target areas.Qualified PersonThe Company’s exploration programs at Macassa are conducted under the supervision of Eric Kallio, P.Geo., Senior Vice President, Exploration. Eric Kallio is the ‘qualified person’ for the purpose of National Instrument 43-101, Standards of Disclosure for Mineral Projects, of the Canadian Securities Administrators, and has reviewed and approved the scientific and technical information in this news release.For further information regarding the Company’s 2018 Mineral Reserves and Mineral Resources estimates for the Macassa Mine, please refer to the Company’s news release dated February 21, 2019 and the Technical Report entitled “Macassa Property, Ontario, Canada, Updated NI 43-101 Technical Report”.QA/QC ControlsThe Company has implemented a quality assurance and control (“QA/QC”) program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. The drill core is sawn in half with one half of the core samples shipped to Swastika Laboratories in Swastika, Ontario. The other half of the core is retained for future assay verification. Other QA/QC includes the insertion of certified reference standards, blanks and the regular re-assaying of pulps and rejects at alternate certified labs. Gold analysis is conducted by fire assay using atomic absorption or gravimetric finish. The laboratory re-assays at least 10% of all samples and additional checks may be run on anomalous values.About Kirkland Lake Gold Ltd.Kirkland Lake Gold Ltd. is a growing gold producer operating in Canada and Australia that produced 723,701 ounces in 2018 and is on track to achieve significant production growth over the next three years, including target production of 950,000 – 1,000,000 ounces in 2019, 930,000 – 1,010,000 ounces in 2020 and 995,000 – 1,055,000 ounces in 2021. The production profile of the Company is anchored by two high-grade, low-cost operations, including the Macassa Mine located in Northern Ontario and the Fosterville Mine located in the state of Victoria, Australia. Kirkland Lake Gold’s solid base of quality assets is complemented by district scale exploration potential, supported by a strong financial position with extensive management and operational expertise.For further information on Kirkland Lake Gold and to receive news releases by email, visit the website www.klgold.com.Cautionary Note Regarding Forward-Looking InformationThis Press Release contains statements which constitute ”forward-looking statements” within the meaning of applicable securities laws, including statements regarding the plans, intentions, beliefs and current expectations of the Company with respect to the future business activities and operating performance of the Company. The words “may”, “would”, “could”, “should”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions, as they relate to the Company, are intended to identify such forward-looking statements. Investors are cautioned that forward-looking statements are based on the opinions, assumptions and estimates of management considered reasonable at the date the statements are made such as, without limitation, opinion, assumptions and estimates of management regarding the Company’s business, including but not limited to; the continued exploration programs on the SMC and Amalgamated Break mineralization, the timing and results thereof; the ability to continue to expand the SMC and Amalgamated Break and to increase levels of resources and the anticipated timing thereof; the potential to increase the level of resources and reserves and potential conversion of mineral resources; the anticipated completion date of the #4 shaft and potential impact and benefits thereof; the amount of future production over any period; and assumptions made relating to operating cash costs based on forecasts and projections. Such opinions, assumptions and estimates, are inherently subject to a variety of risks and uncertainties and other known and unknown factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. These factors include the Company’s expectations in connection with the projects and exploration programs being met, the impact of general business and economic conditions, global liquidity and credit availability on the timing of cash flows and the values of assets and liabilities based on projected future conditions, fluctuating gold prices, currency exchange rates (such as the Canadian dollar versus the United States Dollar), possible variations in ore grade or recovery rates, changes in accounting policies, changes in the Company’s corporate mineral reserves and resources, changes in project parameters as plans continue to be refined, changes in project development, construction, production and commissioning time frames, the possibility of project cost overruns or unanticipated costs and expenses, higher prices for fuel, power, labour and other consumables contributing to higher costs and general risks of the mining industry, failure of plant, equipment or processes to operate as anticipated, unexpected changes in mine life, seasonality and unanticipated weather changes, costs and timing of the development of new deposits, success of exploration activities, permitting time lines, government regulation of mining operations, environmental risks, unanticipated reclamation expenses, title disputes or claims, and limitations on insurance, as well as those risk factors discussed or referred to in the Company’s annual Management’s Discussion and Analysis and Annual Information Form for the year ended December 31, 2018 and its filings for the quarterly period ended September 30, 2019, filed with the securities regulatory authorities in certain provinces of Canada and available at www.sedar.com.Should one or more of these risks or uncertainties materialize, or should assumptions underlying the forward-looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although the Company has attempted to identify important risks, uncertainties and factors which could cause actual results to differ materially, there may be others that cause results not to be as anticipated, estimated or intended. The Company does not intend, and does not assume any obligation, to update these forward-looking statements except as otherwise required by applicable law.Cautionary Note to U.S. Investors – Mineral Reserve and Resource EstimatesAll resource and reserve estimates included in this news release or documents referenced in this news release have been prepared in accordance with Canadian National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”) and the Canadian Institute of Mining, Metallurgy and Petroleum (the “CIM”) – CIM Definition Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as amended (the “CIM Standards”). NI 43-101 is a rule developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. The terms “mineral reserve”, “proven mineral reserve” and “probable mineral reserve” are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards. These definitions differ materially from the definitions in SEC Industry Guide 7 (“SEC Industry Guide 7”) under the United States Securities Act of 1933, as amended, and the Exchange Act.In addition, the terms “Mineral Resource”, “measured Mineral Resource”, “indicated Mineral Resource” and “Inferred Mineral Resource” are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements filed with the U.S. Securities and Exchange Commission (the “SEC”). Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into reserves. “Inferred Mineral Resources” have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to assume that all or any part of a Mineral Resource exists, will ever be converted into a Mineral Reserve or is or will ever be economically or legally mineable or recovered.FOR FURTHER INFORMATION PLEASE CONTACTAnthony Makuch, President, Chief Executive Officer & Director
Phone: +1 416-840-7884
E-mail: tmakuch@klgold.comMark Utting, Vice-President, Investor Relations
Phone: +1 416-840-7884
E-mail: mutting@klgold.comTable 1. Macassa Exploration Drilling – Amalgamated Break (“AK Break”) and West SMCTable 2. Macassa Exploration Drilling – SMC East
Bay Street News