TORONTO, Feb. 20, 2020 (GLOBE NEWSWIRE) — MacDonald Mines Exploration Ltd. (TSX-V: BMK) (“MacDonald Mines”, “MacDonald” or the “Company”) reports the assay results from the other half of the high-grade intersection of drill hole SM-19-022 that was announced in December 2019 (see Dec. 9, 2019 News Release). The intersection between 16.00 and 20.98 metres included significant visible gold (VG); which is an indication of a potential nugget effect.
A nugget effect results when a small sampling size fails to adequately represent the composition of the core tested due to the non-uniform distribution of high-grade gold nuggets in the material sampled. MacDonald’s methodology to eliminate bias has been to always send the same side of the split core for assay – regardless of where any potential visible gold is noted. By analyzing the other half of the core of hole SM-19-022 and by averaging the grade of both halves, the gold grade of the intersection has increased by more than 35%.The Company may or may not conduct whole-core testing of the other intersections that reported visible gold from the 2019 program.Table 1. Assay results from Hole SM-19-022 – Dec. ’19 vs Feb. ‘20.* Assay results presented over core length. Additional drilling is necessary to estimate true width in the zones discovered in SM-19-022.The December 2019 results from hole SM-19-022 reported the discovery of a significant zone of near-surface gold mineralization north of the Scadding East-West (“E-W”) Pit from 16 to 42 metres depth, intersecting 7.99 g/t gold over 26.2 metres including 10.98 g/t over 4.98 metres and 11.54 g/t over 13.24 metres. It has been well documented in the literature that, in order to adequately sample gold grains, a representative sample should weigh, at minimum, a few hundred tonnes (New Bendigo: Johannsen et al, 2003). In order to counter the nugget effect in hole SM-19-022, the Company decided to assay the other half of the core from hole SM-19-022, even though it recognized that the sample size was small.The sampling of the entire core did make a significant difference in the reported gold grade in the section of the hole between 16.00 and 20.98 metres. The reported grade of the intersection increased by more than 35% when we average all the assay results. There is no assumption that similar results would be observed in other intersections on the property nor that assay results would always be higher. The purpose of this one-time sampling procedure was to corroborate our observations of VG with the results over this particular intersection.Table 2. Drill hole coordinatesHole SM-19-022 tested a mineralized structure located north of the eastern end of the E-W Pit of the Scadding Deposit. Consistent with MacDonald’s observation that the historic drilling patterns were not systematically optimized to test the mineralized structures of the property, hole SM-19-022 was collared at an azimuth that was 193.5 degrees opposite of the azimuth a drill hole from the 2011 drilling program located on the same drill pad. This led in hole SM-19-022 to the discovery of a significant zone of near-surface high-grade gold mineralization starting from 16 metres down-hole. Additional drilling will be necessary to fully constrain the geometry and extent of the newly discovered structure.On-site Quality Assurance/Quality Control (“QA/QC”) Measures
Drill core samples were transported in security-sealed bags for analyses to Bureau Veritas in Timmins, Ontario. Individual samples are labeled, placed in plastic sample bags and sealed. Groups of samples are then placed into durable rice bags and then shipped. The remaining coarse reject portions of the samples remain in storage if further work or verification is needed.MacDonald has implemented a quality-control program to comply with best practices in the sampling and analysis of drill core. As part of its QA/QC program, MacDonald inserts external gold standards (low to high grade) and blanks every 20 samples in addition to random standards, blanks, and duplicates. All samples over 10 g/t gold or the samples with abundant visible gold are analysed by 1 kilogram metallic screen.SPJ Property highlights100% ownership17,720 hectares in excellent mining jurisdiction and close to infrastructureHosts the high-grade past producing Scadding Gold MineEvidence of polymetallic mineralization at the Scadding Deposit indicative of IOCG potentialSignificant gold, cobalt, copper, silver, nickel and rare earth showings outside of the Scadding Deposit footprintHistorically, the Scadding Mine produced 914 kilograms of gold from 127,000 tonnes of mineralized material grading 7.2 g/t (OFR 5771). MacDonald’s reinterpretation of the geological model at the Scadding Deposit and larger SPJ property indicates that it could host a gold-rich Iron-Oxide-Copper-Gold deposit and that significant gold structures may have been missed by previous operators’ drilling campaigns (2009-2011).Qualified Person
Quentin Yarie, P Geo. is the qualified person responsible for preparing, supervising and approving the scientific and technical content of this news release.About MacDonald Mines Exploration Ltd.
MacDonald Mines Exploration Ltd. is a mineral exploration company headquartered in Toronto, Ontario focused on gold exploration in Canada. The Company is focused on developing its large SPJ Project in Northern Ontario.The Company’s common shares trade on the TSX Venture Exchange under the symbol “BMK”.To learn more about MacDonald Mines, please visit www.macdonaldmines.com For more information, please contact:Quentin Yarie, President & CEO, (416) 364-4986, qyarie@macdonaldmines.comOr Mia Boiridy, Investor Relations, (416) 364-4986, mboiridy@macdonaldmines.comNeither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.This News Release contains forward-looking statements. In some cases, you can identify forward-looking statements by terminology such as “may”, “should”, “expects”, “plans”, “anticipates”, “believes”, “estimates”, “predicts”, “potential” or “continue” or the negative of these terms or other comparable terminology. These statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause our or our industry’s actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements.Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.A figure accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/0e4cd543-57bd-4102-984e-cc387082e808
Bay Street News