TORONTO, ONTARIO–(Marketwired – June 14, 2016) – Minera Alamos Inc. (TSX VENTURE:MAI) (the “Company” or “Minera Alamos“) is pleased to provide updates on the ongoing metallurgical testwork targeting gold recovery optimization at its La Fortuna Gold Project (“La Fortuna“) located in Durango Mexico. Further metallurgical work is underway to evaluate an optimal plant flow sheet to be incorporated in the Pre-Feasibility Study (“PFS”) scheduled for release later this year.
“Compared to typical gold heap leach recoveries, these new results represent an approximate 50% increase in potential gold production from the La Fortuna gold resource. In addition, the ability to pre-concentrate the gold prior to leaching allows for further reductions in the scope and capital required for downstream processing equipment”, said Darren Koningen, President of Minera Alamos. “These favorable results allow us to consider alternative processing methods other than heap leaching, possibly increasing the economic potential of the project significantly”.
Highlights:
- Gold is predominantly in the form of free grains that are readily recoverable. Based on the samples tested, recoveries averaging approximately 98% were achieved via direct cyanidation of the ground mineral samples;
- GRG (gravity recoverable gold) results demonstrating that in excess of 80% of the gold from the sample materials can be achieved via centrifugal gravity concentration alone;
- 97-98% of the gold reports to a high grade bulk flotation concentrate representing only 10% (by mass) of the initial sample material;
- High gravity/flotation recoveries are maintained at relatively coarse grind sizes in excess of 200 microns.
Summary of Metallurgical Testwork
The ongoing metallurgical testwork program for the La Fortuna project is being performed at SGS Canada Inc. located in Lakefield, Ontario. SGS Canada is an ISO/IEC 17025 accredited metallurgical testwork and analysis facility with an extensive history of gold process development activities, and is at arm’s length to Minera Alamos.
Samples for the current round of testwork were taken from available diamond drill core from previous drill programs at the La Fortuna project (2008 twin hole drilling program). Core was selected from eight different intervals that represented both high and low grade zones within the deposit as well as different drill depths. The samples were prepared and assayed individually prior to being used to prepare both high (approximately 4 g/t) and low (approximately 2 g/t) grade gold composites.
Material from these two composites was then utilized for a series of metallurgical campaigns that included:
- Conventional ground ore bottle rolls (72 hours);
- Gravity recoverable gold testwork utilizing centrifugal concentrator (Knelson) techniques; and
- Bulk flotation of the gold/sulphide content remaining in the tailings from the gravity concentration tests.
Additional testwork is currently ongoing and is focusing on the following:
- Optimization of grind sizes for the gold/sulphide flotation;
- Maximization of the gravity recoverable gold content of the mineralization; and
- Cyanide leaching of the gravity and flotation concentrates.
Further updates on the metallurgical program will be provided as they become available.
About Minera Alamos
Minera Alamos is a junior exploration and development company. Its growing high-grade Mexican portfolio currently includes the La Fortuna open pit gold project in Durango and the Los Verdes open pit copper-molybdenum project in Sonora, both currently in development.
Mr. Darren Koningen, P. Eng., Minera Alamos Inc.’s President, is the Qualified Person responsible for technical content of this release under National Instrument 43-101. Mr. Koningen has supervised the preparation of, and approved the scientific and technical disclosures utilized in this news release.
Cautionary Note Regarding Forward‐Looking Statements
This press release contains “forward looking statements” and “forward-looking information” under applicable Canadian securities laws. Forward-looking information includes, but is not limited to, information with respect to the proposed transaction, timing of the closing of proposed transaction and the Company’s consideration of the proposed production plans. Generally, forward-looking information can be identified by the use of forward-looking terminology such as “plans”, “expects”, “estimates”, “intends”, “anticipates” or “believes” or variations of such words and phrases or state that certain actions, events or results “may”, “could”, “would”, “might”, or “will be taken”, “occur”, or “be achieved”. Forward-looking information is based on the reasonable assumptions, estimates, analysis and opinions of management made at the date that such statements are made.
Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including the risk factors disclosed elsewhere in the Company’s public disclosure. Accordingly, readers should not place undue reliance on forward-looking information. The forward-looking information contained herein is presented for the purposes of assisting readers in understanding the Company’s plans and objectives and may not be appropriate for other purposes. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
Chris Frostad
(416) 306-0990
www.mineraalamos.com