MONTREAL, QUEBEC–(Marketwired – June 8, 2016) – Management of Sirios (TSX VENTURE:SOI) is pleased to announce complete results of the diamond drilling campaign concluded last march. Besides partial results already published, new results of the twenty-six holes undertaken include grades of 37.2 g/t Au over 4.1 metres including 102 g/t Au over 1.4 metres in drill hole #35; 31.8 g/t Au over 6 metres, including 124.0 g/t Au over 1.5 metres in drill hole #41; 6.0 g/t Au over 7.4 metres in drill hole #54; and 13.0 g/t Au over 2.7 metres, 29,1 g/t Au over 1,2 metres and 29.3 g/t Au over 1 metre in drill hole #53. Gold grades were also confirmed in drill holes where visible gold was observed (press release March 7, 2016) in the new sector located at more than 1.5 km of the main drilled sector, yielding up to 5.5 g/t Au over 1 metre and 5.3 g/t Au over 1.1 metres in drill hole #47 and up to 10.7 g/t Au over 1 metre in #48.

Gold grades reaching respectively 16.1 g/t Au over 1 metre and 2.3 g/t Au over 6 metres were obtained in meta-sedimentary rocks in drill hole #52 in addition to the section, already announced at the end of march, of 12.1 g/t Au over 20.3 metres located at the contact between these same rocks and the tonalite. Other gold grades were also obtained in meta-sedimentary rocks such as 1.2 g/t Au over 16.3 metres in drill hole #54.

Dominique Doucet, President of Sirios states: ”Results of our drilling campaign are highly encouraging, they allowed us to demonstrate the continuities of gold zone along the north-eastern trending structures in the tonalite as well as to confirm significant gold presence in meta-sedimentary rocks. Future exploration efforts will therefore focus on more promising priority targets, such as: the zone or zones ”52” in the drill hole with the same name, the biotite schist intersected in drill hole #40, the new north-west sector around drill holes #47 and #48 located at more than 1.5 km from the main drilled sector; the whole sector neighboring the tonalite-meta-sediments contact and finally, north-east south-west structures. In addition, identified target by till sampling at more than 3 km north-west of main drilled sector, will be the sixth priority target for upcoming fieldworks.”

Fourteen drill holes out of seventeen completed in the main drill sector yielded significant results, only drill holes #34, 39 and 56 yielded at most, anomalous gold grade. Three drill holes, #31, 47 and 48, out of thirteen undertaken outside of this sector yielded significant results. The Winter 2016 diamond drilling program consisted of twenty-six drill holes (#31 to 56) in addition to the extension of #22 for a total of 4,432 metres. Maps showing locations of drill holes as well as long sections are available at the following links:

http://sirios.com/images/Carte-Zoomin-2016-06-06.jpg

http://sirios.com/images/Carte-Zoomout-2016-06-06.jpg

http://sirios.com/images/Longitudinale%20L.jpg

http://sirios.com/images/Longitudinale_I.jpg

http://sirios.com/images/Longitudinale_Jordi.jpg

http://sirios.com/images/Longitudinale_K.jpg

The table below lists all significant results:

MAIN ASSAYS RESULTS

2016 WINTER DRILLING CAMPAIGN

New north-west sector

Information and coordinates of drill holes

The CHEECHOO gold project is located in Eeyou Istchee James Bay, Quebec, 800 km north of Montreal and less than 10 km from the Eleonore gold mine of producer Goldcorp that has just begun production. This world-class gold deposit contains reserves of 4.97 Moz Au (proven and probable categories), combined measured and indicated resources of 1.06 Moz Au and inferred resources estimated at 2.80 Moz Au, for a total of 8.83 Moz of gold. (Source: Goldcorp press release dated February 19, 2015). In 2012, Sirios concluded an agreement with Golden Valley Ltd. regarding ownership of CHEECHOO allowing it, to upon completion of certain obligations and counterparts, increase its current interest to 100% (press release dated December 9, 2013). Sirios has recently completed all these obligations and counterparts and will file shortly a request for transfer of mining claims to the competent authorities.

Assay quality control

NQ-caliber drill cores of current campaign were sawed in half, with one half sent to a commercial laboratory for analysis and other half retained for future reference. A strict QA/QC program was followed by integrating blanks and certified reference materials to the drill core samples, all of which were prepared by IOS Services Géoscientifiques inc. of Chicoutimi, and assayed for gold by fire assay and atomic absorption finish (AA24) by the ALS Minerals laboratories in Val d’Or, Quebec. Samples grading more than 3 g/t were re-assayed by fire assay with gravimetric finish. (GRA22). Samples with visible gold were assayed by pyro-analysis with metallic sieve (SCR24) from a sample of about 1 kg.

This press release was prepared by Dominique Doucet, P. Eng., President of Sirios, Qualified Person pursuant to National Instrument 43-101.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Christian Guilbaud, VP Corporate Development
(514) 813-7862
(514) 510-7964 (FAX)
[email protected]
www.sirios.com