VANCOUVER, British Columbia, April 16, 2020 (GLOBE NEWSWIRE) — Strongbow Exploration Inc. (TSX-V: SBW) (“Strongbow” or the “Company”) reports that it has received the final assays for the over-limit copper assays from the high-grade discovery at the United Downs project, Cornwall UK (see Company News Release dated April 7, 2020).
KEY POINTSDiamond drill hole GWDD-002 intersected semi-massive sulphide mineralisation between 90.60m and 105.29m downhole depth;Three samples within the 14.69m intercept reported assays greater than 20% Cu (“over-limit”). The three over-limit samples have been re-assayed and returned 24.0% Cu, 23.8% Cu, and 26.2% Cu, respectively. The table below summarises all of the copper and tin assays within the zone;The final result for the intercept is 14.69m grading 8.45% Cu, 1.19% Sn and 0.15% Zn;Further drilling is required to confirm true width, as well as the strike and dip of the mineralised zone;The copper occurs as both chalcopyrite and chalcocite;Copper grades reflect recorded historical mine production from United Mines located approximately 200m to the south UNITED DOWNS PROJECTThe United Downs project covers, or is located immediately adjacent to, four former copper and tin producing mines: Consolidated Mines and United Mines to the west; and, Mount Wellington and Wheal Jane Mines to the east (see map). The main mineralised structures in all four mines trend ENE and dip steeply to the north. All of the mineralisation exploited historically is related to either quartz veins or quartz-tourmaline veins hosted within “killas”, the local name for metasedimentary rocks that overlie granite intrusions. TECHNICAL INFORMATIONGWDD-002 was drilled by Priority Drilling Company Ltd using an Epiroc Christensen CT20 Diamond Drill Rig. The part of the hole in which this intersection was encountered was drilled in PQ (122.6mm diameter) with a triple tube core barrel to recover an 83mm diameter drillcore. Core recovery was greater than 95%. The core was logged, split and sampled by Strongbow Exploration personnel. The samples, comprising quarter core, were sent for assay at ALS Minerals, Loughrea, Ireland. Sample preparation involved crushing to 70% less than 2mm, riffle split and pulverised to 85% less than 75 microns. The analytical method used was X-ray fluorescence (XRF) following a lithium borate fusion. Samples were assayed for As, Cu, Fe, Pb, S, Sn, W, and Zn. A comprehensive Quality Assurance / Quality Control programme using duplicates and blanks was included within the sampling programme.The technical information in this news release has been compiled on behalf of Strongbow Exploration Inc. by Mr. Owen Mihalop. Mr. Mihalop has reviewed the data on behalf of Strongbow Exploration Inc. and takes responsibility for the data and geological interpretation. Mr. Owen Mihalop (MCSM, BSc (Hons), MSc, FGS, MIMMM, CEng) is Chief Operating Officer for Strongbow Exploration Inc. and has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined under the JORC Code (2012) and as a Qualified Person under NI 43-101. Mr. Mihalop consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears.For additional information please contact: Irene Dorsman at (604) 210 8752 or by e-mail at idorsman@strongbowexploration.com or Sherman Dahl of Pretium Communications at (250) 558 8340.ON BEHALF OF THE BOARD OF DIRECTORS
“Richard D. Williams”
Richard D. Williams, P.GeoNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.Caution regarding forward looking statementsForward-looking statements, while based on management’s best estimates and assumptions, are subject to risks and uncertainties that may cause actual results to be materially different from those expressed or implied by such forward-looking statements, including but not limited to: risks related to receipt of regulatory approvals, risks related to general economic and market conditions; risks related to the availability of financing; the timing and content of upcoming work programs; actual results of proposed exploration activities; possible variations in Mineral Resources or grade; failure of plant, equipment or processes to operate as anticipated; accidents, labour disputes, title disputes, claims and limitations on insurance coverage and other risks of the mining industry; changes in national and local government regulation of mining operations, tax rules and regulations.
Although Strongbow has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. Strongbow undertakes no obligation or responsibility to update forward-looking statements, except as required by law.The technical information in this news release has been compiled on behalf of Strongbow Exploration Inc. by Mr. Owen Mihalop. Mr. Mihalop has reviewed the data on behalf of Strongbow Exploration Inc. and takes responsibility for the data and geological interpretation. Mr. Owen Mihalop (MCSM, BSc (Hons), MSc, FGS, MIMMM, CEng) is Chief Operating Officer for Strongbow Exploration Inc. and has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined under the JORC Code (2012) and as a Qualified Person under NI 43-101. Mr. Mihalop consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears.Additionally, the technical information in this news release has been reviewed by Mr. Mark Owen. Mr. Owen has reviewed the data and takes responsibility for the data and geological interpretation. Mr. Mark Owen (MCSM, BSc (Hons), MSc, EurGeol, FGS, CGeol) is a Consultant to Strongbow Exploration Inc. and former Chief Geologist of both Wheal Jane and South Crofty mines. Mr. Owen has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined under the JORC Code (2012) and as a Qualified Person under NI 43-101. Mr. Owen consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears.
Bay Street News